Inspired by the 24" Carina, the 29.5" Marsala Single Vessel Sink Bath Vanity was designed to capture beauty and scaled down to perfection. The build is of high quality solid oak wood and finished in espresso complexion. A durable white stone top rests magnificently above the vanity. Finally, a beautiful white ceramic basin thrones the vanity and is crowned by a beautifully designed stainless steel faucet. The Marsala is a well designed contemporary bathroom vanity. The matching mirror accents an elegant euro modern design. Both Faucet, Mirror and vanity mounting hardware will be included with your vanity purchase so you can be confident that you'll receive everything you need to complete your bathroom remodel.
|Vanity ||29.5"W x 22.1"D x 20.9"H |
|Basin ||16"W x 16"D x 4.7"H |
|Mirror ||23.6"W x 0.7"D x 31.5"H |
- Made from zero emissions solid oak
- Espresso finish
- Water resistant low V.O.C. sealer
- White marble or tempered glass top
- Ceramic vessel sink
- Single-hole vessel faucet mount
- Single functional drawer
- Adjustable, soft-closing slides
- Brushed Nickel hardware
- Chrome faucets and pop-up drain included
- Comes with matching framed mirror
- Two year warranty
|A. Lenola Side Cabinet ||15.7"W x 11.8"D x 62.2"H |
|B. Norma Side Cabinet ||15.7"W x 11.8"D x 31.5"H |
|C. Tarano Side Cabinet ||13.8"W x 11.8"D x 39.4"H |
|D. Forano Side Cabinet ||11.8"W x 8.9"D x 47.2"H |
|E. Arsoli Side Cabinet ||11.8"W x 8.9"D x 55.1"H |
|F. Gerano Side Cabinet ||13.8"W x 9.1"D x 66.9"H |
|G. Marino Side Cabinet ||15.7"W x 14.6"D x 42.1"H |
|H. Woodford Side Cabinet ||19.7"W x 15.7"D x 71.5"H |
|I. Vernon Side Cabinet ||19.7"W x 15.7"D x 71.5"H |
|J. Swanton Side Cabinet ||23.6"W x 15.7"D x 71.5"H |
|K. Richford Side Cabinet ||31.8"W x 15.6"D x 71.5"H |
|L. Orwell Side Cabinet ||17.7"W x 20.9"D x 27.6"H |
|M. Norton Side Cabinet ||17.7"W x 21.9"D x 27.6"H |
The Solid Oak Advantage
Quality materials are important to the longevity of your bathroom vanity. Cheap vanities made with particle board or MDF tend to sag, warp, split, discolor, and expand over time. This is especially true in humid climates, such as the environment found in a normal bathroom. Since bathroom humidity is so common, bathroom vanities need to be extremely durable. They also need to be strong enough to endure lots of usage-based wear and tear. Vanities are typically made of MDF, birch, rubberwood, or natural oak. Generally, MDF is approximately 30 % the quality of oak, birch is 50% the quality of oak, and rubberwood is typically 90% the quality of oak, where "quality" is defined as the strength, integrity, and durability of the material. Solid oak is without question the strongest, most durable, and most resilient of all vanity materials. Only the highest-quality and best made vanities are manufactured from natural oak.
Vanities that are marked as Premier Collection are the best vanities in the industry where no expense has been spared. These are the best vanities money can buy made from small quantities of handpicked solid hard woods that are hand finished to perfection. To be considered part of the Premium Collection the vanity must get A+++ grades in: Wood used, Interior Construction, Counter Top, and Finish.
Premier Collections uses Kiln dried wood in small batches to insure proper drying to prevent cracking and warping. All wood is cared for in great detail to prevent cracking and warping so that your vanity looks as good as they day it arrived for many years.
Premier Collections vanities that have stone tops use a thicker stone, up to 3cm (1cm more than industry average), providing a more luxurious look. All of the vanities with stone tops are sealed to prevent watermarks and minor stains.
Premium Collection vanities use hard wood box framed construction that provides strength and durability for decades. All vanities have working drawers with able storage made with slide ball bearing drawers and or soft close mounts. Center drawers are boxed and fitted around plumbing for additional storage.
Premium Collection vanities are all hand stained, hand painted, using up to a 15 layer sealing and finishing process to avoid future fading, cracking, or peeling.